LONG LENGTH MACHINABLE UNIFORCE CLAMPS
Mitee-Bite products Inc. introduces the long length Uniforce Clamp with machinable jaws. The long length clamping jaws give you greater versatility to machine the clamp to conform to the shape of your workpiece, enabling you to fixture difficult applications easily.

The specially designed steel wedge spreads the clamping force uniformly on both sides of the 7 1/2" long, 7075-T6 aluminum channel. One locking plate is recommended for each drive screw when machining the clamp to your specifications (sold separately). These clamps are available in our most popular sizes. (See chart below.)
Part No.   Model A* B   C D E F+ H** I Torque
(Ft./Lbs.)
Max.
Holding
Force
60051   500 Channel 1.125 .50   7.50 .420 .25 .18 2-56 8-32 2.5 500
60052   500 Steel Slug NA NA   7.50 NA NA NA NA NA NA NA
60071   750 Channel 1.500 .75   7.50 .632 .37 .26 6-32   1/4-20 10.8 1500
60072   750 Steel Slug NA NA   7.50 NA NA NA NA NA NA NA
60101   1000 Channel 2.000 1.00   7.50 .820 .50 .39 6-32   5/16-18 10.4 2000
60102   1000 Steel Slug NA NA   7.50 NA NA NA NA NA NA NA
60151   1500 Channel 3.000 1.50   7.50 1.215 .75 .62 10-32   1/2-13 28.3 3500
60152   1500 Steel Slug       7.50 NA NA NA NA NA NA NA
* The distance needed between workpieces for clamp clearance, drill and tap mounting holes on the center of "A" dimension.
+ The amount of machineable stock on jaws.
** 4 mounting screws (G) and 3 drive screws (H) included..
Does not include plating or drilled holes.