SERIES-9 CLAMPS     This adjustable low profile, cam action clamp provides clamping of different size work pieces merely by rotating the clamp to one of its other edges. The clamps are 10mm (.394) inches high and use a 1/2-13 cam screw. Each of the six clamping surfaces is a different distance from the centerline by 1mm (.0394) inches as shown in the chart. Therefore, one Series-9 clamp can hold parts that vary up to .240 inches simply by rotating the clamp to a different clamping surface. Serrated or smooth edges Heat treated and plated 4,000 lbs. holding force TORQUE VALUES Part Number Screw Size Torque/Load Ft.Lbs./Lbs. 90110-90145 1/2 - 13 65/4000 Part No.   Description Face No. Distance from   Part No.   Description Face No. Distance from 90110 CAD 1-6 Smooth 1 .4724   90130 CAD 13-18 Smooth 13 .9449 90115 CAD 1-6 Serrated 2 .5118   90135 CAD 13-18 Serrated 14 .9842       3 .5512         15 1.0236       4 .5906         16 1.0630       5 .6299         17 1.1024       6 .6693         18 1.1417                       90120 CAD 7-12 Smooth 7 .7086   90140 CAD 19-24 Smooth 19 1.1811 90125 CAD 7-12 Serrated 8 .7480   90145 CAD 19-24 Serrated 20 1.2205       9 .7874         21 1.2598       10 .8268         22 1.2992       11 .8661         23 1.3386       12 .9055         24 1.3780