SERIES-9 CLAMPS     This adjustable low profile, cam action clamp provides clamping of different size work pieces merely by rotating the clamp to one of its other edges. The clamps are 10mm high and use an M12 cam screw. Each of the six clamping surfaces is a different distance from the centerline by 1mm as shown in the chart. Therefore, one Series-9 clamp can hold parts that vary up to 9.4 mm simpy by rotating the clamp to a different clamping surface. Serrated or smooth edges Heat treated and plated 17800 (N.m.) holding force TORQUE VALUES AND HOLDING FORCE Part No. Screw Size Torque/Holding Force 95110 - 95145 M12 88 / 17800 Part No. Description Face No. Distance from   Part No. Description Face No. Distance from 95110 CAD 1-6 Smooth 1 12mm   95130 CAD 13-18 Smooth 13 24mm 95115 CAD 1-6 Serrated 2 13mm   95135 CAD 13-18 Serrated 14 25mm     3 14mm       15 26mm     4 15mm       16 27mm     5 16mm       17 28mm     6 17mm       18 29mm                   95120 CAD 7-12 Smooth 7 18mm   95140 CAD 19-24 Smooth 19 30mm 95125 CAD 7-12 Serrated 8 19mm   95145 CAD 19-24 Serrated 20 31mm     9 20mm       21 32mm     10 21mm       22 33mm     11 22mm       23 34mm     12 23mm       24 35mm