VACMAGIC    

Low profile base unit quickly mounts to
machine table. Operates with 70 psi standard shop air.

Vacuum pallet with rubber cord positioned for thin workpiece.

Workpiece placed over rubber cord and pushed down to create a vacuum. Now ready for machining.		 ADVANTAGES OF VACMAGIC VM300
  • Quick Change - swap pallets in 30 seconds or less
  • Productivity Maximized - load pallets while machining
  • Easy to Install and set up
  • Precise Repeatability of .0005" (.013mm)
  • Reliable and easy to use - virtually maintenance free
  • Flexible pallet design - limited only by your imagination
  • No pumps - use standard shop air
  • Use standard shop air


"Using a 2" (50mm) diameter face mill, we cut 6061 aluminum at 0.118" (3mm) deep, with a feed rate of 250"/min. (6.4 meters/min) with no sign of vibration or instability"

Tech Report on file



"We had a job that required profiling and cutting through half-inch highly engineered polymer plates. We cut our own seal design into a pallet and machined the run without a single reject. When finished, we simply resurfaced the pallet for the next job. With Vacmagic we make our own custom vacuum holders quickly, easily, and to super-tight specs. Invaluable!"

Customer name withheld. Manufacturer of printing systems


"Our Vacmagic holds motorcycle cylinder heads, disc breaks, chucks, vices, and numerous other parts. The change-over from having an 8" chuck mounted on the machine to having a cylinder head is about 30 seconds - before Vacmagic, this would have taken an hour! Another real benefit is the ability to break into a long production run to fit in a rush job - knowing the only time lost is the 30 second change-over. Our stock of pallets with ready-mounted jigs is growing. daily."

R. Allen, Motalia Limited

Vise mounted on standard pallet for quick change
from production to prototype.

The small tube is connected to a
low pressure safety switch to disable machine if
air pressure is too low.


"We cut our setup time by 80%, reduced cycle times - including load/unload - by 50%. Fantastic! It paid for itself in one pay period."

Martin Fuller, CNC Engineer, Respirex International


Tech Data

Air Supply Requirements 70 psi (5 bar)
2 SCFM (55 SLPM)
Low Pressure Safety Switch…Included
Vacuum Indicator………Included
Hardened Locator Pins……Included
Base Unit………1.375"(35mm)height
 12.75"(323mm)width
 13.0"(330mm)depth
Blank Pallet………0.750"(19mm)height
 14.2"(360mm)width
 12.4"(315mm)depth
Vacuum Pallet………0.63"(16mm)height
 14.2"(360mm)width
 12.4"(315mm)depth
Part No. CAD Description
45101 CAD Complete System w/2 (19mm) blank pallets, 1 vacuum pallet and 4 large mounting clamps
45110   Vacuum Gasket per 5 ft. length
45130 CAD 19mm Blank Pallet
45150 CAD Vacuum Pallet
45175 Base Unit (Receiver) and 4 large mounting clamps
22815 CAD Large single mounting clamp

Watch Vacmagic in action: