T-Slot Clamps
Measurements Available: Inch, Metric

T-Slot Clamps
The original MITEE-BITE T-Slot Clamp combines our unique cam action clamping element with a T-nut.
- Locks in machine T-slot for low profile clamping.
- Makes fast set-ups possible right on the machine table.
- Brass hex follows contour of unusual shaped parts.
- Packaged in pairs or complete kits.
- Hex key not included.
Inch
Part Number |
T-Slot Size | Number of Clamps Per Pack |
Max. Torque* (Ft/Lbs) |
Holding Force (lbs) |
|
---|---|---|---|---|---|
10420 | CAD | 3/8 | 2 | 6.2 | 800 |
10421 | CAD | 7/16 | 2 | 8.3 | 800 |
10422 | CAD | 1/2 | 2 | 20.8 | 2000 |
10423 | CAD | 9/16 | 2 | 20.8 | 2000 |
10424 | CAD | 5/8 | 2 | 45.0 | 3000 |
10426 | CAD | 11/16 | 2 | 45.0 | 3000 |
Metric
Part Number |
T-Slot Size | Number of Clamps Per Pack |
Max. Torque* (N.m.) |
Holding Force (N.) |
|
---|---|---|---|---|---|
50422 | CAD | 8mm | 2 | 8.55 | 3558 |
50424 | CAD | 10mm | 2 | 8.55 | 3558 |
50426 | CAD | 12mm | 2 | 11.30 | 3355 |
50428 | CAD | 14mm | 2 | 28.00 | 8900 |
50430 | CAD | 16mm | 2 | 61.00 | 13340 |
50432 | CAD | 18mm | 2 | 61.00 | 13340 |
50434 | CAD | 20mm | 2 | 135.00 | 26700 |
50436 | CAD | 22mm | 2 | 135.00 | 26700 |
*Maximum torque is not necessary. Normally half that value is sufficient.