Fixture Clamps

Measurements Available: Inch, Metric

Fixture Clamps

The Cam Action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.

– Low profile for quick and easy installation for linear motion guide rails
– Cam action provides fast, strong clamping
– Small size allows more parts per load
– Simple design keeps cost low
– 50218 our most popular LMGR size – available in bulk

NOTE: Clockwise rotation is recommended. Locating pin should be on the right of workpiece.

Inch

Part No.		Model	A	B	C	D	E	F	G*	Max. Torque* (ft/lbs)	Holding Force (lbs.)	No. of Clamps per Pack**	Replacement Cam Screw	Replacement Hex Washer
10202	CAD	MB-2	8 – 32	5/64	.030	.312	.110	.350	.150	1.5	205	10	10363	10580
10207	CAD	MB-3	10 – 32	3/32	.040	.500	.160	.340	.250	2.5	350	10	10366	10587
10204	CAD	MB-4	1/4 – 20	1/8	.040	.625	.190	.470	.308	6.2	800	10	10365	10582
10205	CAD	MB-5	5/16 – 24	3/16	.040	.812	.180	.460	.400	8.3	800	12	10369	10584
10201	CAD	MB-5C	5/16 – 18	3/16	.040	.812	.180	.460	.400	8.3	800	12	10367	10584
10206	CAD	MB-6	3/8 – 16	3/16	.050	.812	.250	.710	.400	20.8	2000	10	10371	10586
10208	CAD	MB-8	1/2 – 13	5/16	.100	1.000	.375	.900	.500	65.0	4000	8	10373	10588
10210	CAD	MB-10	5/8 – 11	3/8	.100	1.187	.500	1.125	.590	100.0	6000	4	10375	10592
Stainless Steel
10214	CAD	MB-SS2	8 – 32	5/64	.030	.312	.110	.350	.150	1.5	205	4	10362	10581
10203	CAD	MB-SS4	1/4 – 20	1/8	.040	.625	.190	.470	.308	6.2	800	4	10364	10583
10213	CAD	MB-SS5C	5/16 – 18	3/16	.040	.812	.250	.460	.400	8.3	800	4	10368	10585

*Maximum torque is not necessary. Normally half that value is sufficient. **Clamps available in bulk (50+ pieces, contact Mitee-Bite Products for more information).

Metric

Part No.		Model	A	B	C	D	E	F	G	Max. Torque* (N.M.)	Holding Force(N)	No. of Clamps per Pack**	Replacement Cam Screw	Replacement Hex Washer
50204	CAD	MB-4M	M4x7	3mm	.76	7.93	2.80	9.6	3.80	2.0	910	10	50363	10580
50206	CAD	MB-6M	M6x1.0	4mm	1.01	15.86	4.75	11.2	7.80	8.5	3558	10	50365	10582
50208	CAD	MB-8M	M8x1.25	5mm	1.01	20.61	4.55	15.0	10.15	11.3	3558	12	50367	10584
50210	CAD	MB-10M	M10x1.5	7mm	1.27	20.61	6.35	19.0	10.15	28.0	8895	10	50369	10586
50212	CAD	MB-12M	M12x1.75	8mm	2.03	25.38	9.52	22.8	12.70	88.0	17790	8	50371	10590
50216	CAD	MB-16M	M16x2.0	12mm	2.54	30.13	12.70	28.5	15.00	125.0	26680	4	50373	10592
50218	CAD	MB-8Mx10	M8x1.25	5mm	1.01	20.61	4.55	15.0	10.15	11.3	3,558	bulk	502181	10584
Stainless Steel
50214	CAD	MB-SS4M	M4x7	2.5mm	.76	7.93	2.80	9.6	3.80	2.0	910	4	50361	10581
50205	CAD	MB-SS6M	M6x1.0	4mm	1.01	15.86	4.75	11.2	7.80	8.50	3558	4	10583
50207	CAD	MB-SS8M	M8x1.25	5mm	1.01	20.6	6.35	15.0	10.15	11.30	3558	4	50366	10585

*Maximum torque is not necessary. Normally half that value is sufficient. **Clamps available in bulk (50+ pieces, contact Mitee-Bite Products for more information).

Applications

: Image courtesy of Nathan Ward

: @machmachineinc – This new fixture is dripping! First of two operations is complete. Stay tuned for the second op setup. This setup will produce 50 pieces per rotation running every night unattended in our twin Okuma MB-5000H on a 24 pallet Fastems FMS.

: Image courtesy of @westboundmachinellc. “These new fixtures we designed are working great. Thanks to @miteebite for the awesome clamps. They have incredible holding power and are super easy to use. Now we don’t have to throw a vise back on the machine to do this op.”

: Image courtesy of @westboundmachinellc. “These new fixtures we designed are working great. Thanks to @miteebite for the awesome clamps. They have incredible holding power and are super easy to use. Now we don’t have to throw a vise back on the machine to do this op.”